Titanium Plate & Sheet
Titanium plate and sheet supplied to defined grade, condition, dimensions, surface, inspection, and documentation requirements.
Titanium Valley supplies titanium plate, sheet, cut plate, and machined blanks for specification-driven industrial programs. Supply is matched to the required grade, standard, dimensions, condition, surface, flatness, tolerances, inspection scope, and service environment.
Sourcing data for titanium plate.
| Typical forms | Plate, sheet, cut plate, machined blank |
|---|---|
| Thickness and size | Defined by grade, condition, tolerance, quantity, and production route |
| Cut-to-size supply | Rectangular blanks and drawing-based shapes subject to technical review |
| Common grades | Gr1, Gr2, Gr4, Gr5, Gr12, Gr23 |
| Reference standards | ASTM B265, AMS 4911, or the stated project specification when applicable |
| Condition | Annealed or project-defined condition |
| Surface and edges | Mill finish or project-defined surface; edge condition specified in the RFQ |
Select the grade for the service conditions.
Use these as selection starting points. Final choice depends on the drawing, governing specification, service conditions, and qualification requirements.
| Grade | Typical selection logic | Confirm before quotation |
|---|---|---|
| Grade 1 | Commercially pure titanium selected where high ductility and formability are important. | Forming route, condition, surface, and governing specification. |
| Grade 2 | General-purpose commercially pure titanium balancing strength, formability, and corrosion resistance. | Service environment, fabrication route, dimensions, and inspection scope. |
| Grade 4 | Higher-strength commercially pure titanium for programs that still require CP titanium chemistry. | Strength requirement, condition, forming demand, and applicable standard. |
| Grade 5 | Ti-6Al-4V plate for higher-strength structural or machined components. | Condition, specification, ultrasonic or other testing, and downstream machining. |
| Grade 12 | Corrosion-focused titanium alloy considered for specific chemical-service environments. | Process media, temperature, fabrication, and corrosion-design basis. |
| Grade 23 | Ti-6Al-4V ELI for programs with tighter interstitial or sector-specific requirements. | Exact standard, condition, qualification documents, and end-use requirements. |
Three items to prevent specification gaps.
Confirm dimensions together with grade, condition, tolerances, quantity, and inspection scope.
Dimensions and tolerance
State finished thickness, width, length, quantity, dimensional tolerance, flatness expectation, and whether the order is full plate, rectangular blanks, or drawing-based parts.
Condition and surface
Specify annealed or other required condition, mill or project-defined surface, edge condition, and restrictions related to forming, welding, machining, or appearance.
Inspection and documents
Specify the governing standard, certificate type, heat or lot traceability, dimensional records, testing scope, third-party inspection, marking, and packing.
Match plate & sheet supply to the application.
End use determines the grade, condition, dimensional control, surface preparation, testing, traceability, and downstream fabrication route.
Chemical processing
Grade and fabrication route depend on the process media, concentration, temperature, pressure, joint design, and corrosion allowance. Provide application details before material selection.
Review application detailsAerospace and lightweight structures
The drawing, specification, condition, inspection class, traceability, and downstream machining route determine whether a proposed plate supply is suitable.
Review application detailsMedical and precision parts
Exact alloy, standard, condition, cleanliness, traceability, and qualification requirements must be stated; a generic Grade 5 description is not enough for a regulated program.
Review application detailsSemiconductor and high-purity equipment
Surface condition, cleanliness, dimensional control, fabrication route, and contamination-sensitive handling requirements should be defined with the end use.
Review application details
Define inspection and documentation before production.
Align document requirements with the production lot, inspection plan, marking, and final records.
- Material identity and heat or lot traceability aligned with the delivered material when required
- Chemical and mechanical results checked against the specified material standard when required
- Thickness, width, length, flatness, surface, and edge checks agreed for the order
- Certificate type, additional testing, witness points, marking, and packing confirmed before order release
Frequently asked questions about titanium plate.
Which grades of titanium plate do you supply?
Common requests include Grades 1, 2, 4, 5, 12, and 23. The applicable standard, condition, dimensions, testing, and cut-to-size route are confirmed for the selected grade before quotation.
Can you cut titanium plate to a custom size?
Yes. Cut-to-size supply is reviewed against your drawing, thickness, flatness, and tolerance requirements.
What is Gr5 titanium sheet used for?
Grade 5 (Ti-6Al-4V) is considered for higher-strength structural and machined components. Suitability depends on the applicable specification, condition, qualification, inspection, and end-use requirements.
Processing tailored to your drawing.
Send dimensions, tolerances, surface, packing, and inspection requirements so we can define the production route.
Send enough detail for a technical review.
Mark unknown items for discussion. This separates confirmed requirements from points requiring engineering or procurement review.
- Grade or alloy designation
- Governing standard and revision
- Thickness, width, length, and tolerances
- Condition, surface, flatness, and edge requirements
- Quantity and acceptable production unit
- Cutting, machining, or drawing requirements
- Inspection, testing, certificate, and traceability scope
- Packing, marking, destination, and requested delivery window
Related material pages.
Use these links to compare adjacent product forms and materials without returning to the full product directory.
Send a titanium plate requirement.
Include grade, standard, dimensions, tolerance, condition, surface, quantity, destination, and required documents. A drawing or previous specification helps us respond faster.